Discover the importance of manufacturing and service lubricants for our ropes. Maintenance of ropes enhances lifetime performance! We listened to our customers and addressed some industry challenges. BriLube Ultra: developed to perform in more challenging environments. Enhanced rope lubricant, manufactured with a unique hybrid grease, suitable for;
Operation in ultra-deep waters.
A wide operating temperature range suitable for active heave compensation systems and warmer tropical climates.
Along with a three stage corrosion protection system with a unique ‘water wash off’ performance for frequent subsea operation.
High pressure in deep water breaks down the rope lubricants components and cause permanent loss or degradation.
When using an "active heave compensating system" and "cyclic bending over sheaves", a lot of heat is generated, which softens wax-based lubricants and results in a loss of lubricant.
Working the lubricant around 60°C (against 110°C drop point) causes wax to become fluid.
Corrosion, causing premature rope failure or reduced service life
Environmental impact concerns
Deck safety issues with lubricant "fling off"
Increased maintenance costs
BriLube Fit: Traditional wire rope lubricants suitable for a wide range of offshore applications
BriLube Ultra: Developed to perform in more challenging environments
Suitable for sub-sea deployment with good wash-off protection
Corrosion protection
Wear resistant
Enhanced rope lubricant, manufactured with a unique hybrid grease, suitable for operation in ultra-deep waters
A wide operating temperature range, suitable for active heave compensation systems and warmer tropical climates
Along with a three-stage corrosion protection system with a unique "water wash-off" performance for frequent subsea operations
High performance traditional lubricant suitable for a wide range of offshore applications
Temperate climate
Operational -40°C to +60°C
Drop point 100°C to 110°C
Break point -55°C
Subsea deployment (up to 1000m)
Wash-off protection
Wear resistance
Advanced high performance hybrid grease developed to perform in more challenging environments
Suitable for 'active heave compensator' systems
Artic and tropical climates
Operational -40°C to +120°C
Drop point +163°C
Breaking point -60°C
Subsea deployment in ultra-deep waters
Enhanced wash-off protection
Extreme corrosion protection
Greater wear resistance
Stranding
Recommended where lubricant deposits may cause issue
Stranding
Core closing
Recommended for typical overhead crane applications
Stranding, Core closing
Rope Closing
Recommended for subsea applications & long-term storage
A medium thixotropic gel lubricant with stable properties over a wide temperature range offering long lasting corrosion protection.
A unique hybrid grease, suitable for operation in ultra-deep waters. A wide operating temperature range suitable for active heave compensation systems and warmer tropical climates, along with a three-stage corrosion protection system with a unique 'water wash-off' performance for frequent subsea operation.
Uniquely developed high pressure spray.
A semi-dry thin film lubricant excellent penetration and corrosion resisting properties for surface cranes.
A synthetic lubricant which deposits a slip-resistance film on the wire surfaces for friction driven rope installations.
Uniquely developed low-pressure spray applicator. Easy 'backpack' style application 1-4 bar pressure Saves time Cost effective.
Liftek Technical Services LLC
P.O. Box: 8751, Musaffah Industrial Area, M-44,
Abu Dhabi, UAE
Liftek Technical Safety LLC
Office No 803, Suntech Tower, Silicon Oasis,
Dubai, UAE
Copyright © 2026 www.liftek-intl.com. All Rights Reserved.
